1/4 Scale Figure Guide

If you are comparing 1/4 scale figure guide, the useful questions are narrower than most guides admit: what it is made of, how it is finished, how big it actually is, and how many exist.

What Scale Actually Means

Scale is the ratio between a model and the real subject it depicts. A 1/4-scale bust reproduces the upper body at one quarter of life size, which for a human subject lands the finished piece in the 30–36 cm height band. Collectors quote height rather than width, because the silhouette is what fills the shelf and defines how a piece reads at eye level.

Scale vs Size vs Proportion

Scale is the ratio; size is the resulting centimetres; proportion is how the bust is cropped, head-and-shoulders versus half-figure. Two pieces can share a scale but read very differently because one is a tighter crop. Check the listed height before assuming two releases will sit evenly together.

Side by Side

	ASH 1/4-scale polystone bust	LIN YUANZHE 1/4-scale articulated bust
Material	Polystone	Mixed media
Edition	500	999
Height	~32 cm	~34 cm
Lit / posed	No	LED eyes, articulated

How Height Is Derived

Manufacturers publish a height, and a quarter-scale human bust of about 1.8 m tall resolves to roughly 32–34 cm once the base and head crest are included. The ASH 1/4-scale polystone bust sits near 32 cm; the LIN YUANZHE 1/4-scale articulated bust near 34 cm because mixed-media armour adds volume. Always measure the piece you receive, not the box art, because a centimetre of difference is enough to change which shelf it fits.

ASH vs LIN YUANZHE

The ASH 1/4-scale polystone bust is a static 1/4-scale polystone bust, hand-painted, alloy base, edition of 500, about 32 cm, $459. The LIN YUANZHE 1/4-scale articulated bust is a 1/4-scale mixed-media articulated bust with red LED eyes on Type-C, edition of 999, about 34 cm, $499. Same studio, different collector job, and both are built to share a shelf.

Read the specification before the photograph, buy the piece you would keep even if the price never moved, and plan the shelf at the same time as the purchase.

Frequently asked

Q1 What matters most when choosing 1/4 scale figure guide?

Material, scale and edition size decide how a piece displays and how it holds value. Compare those three first, then look at finish and base.

Q2 How much should I expect to pay for 1/4 scale figure guide?

Entry pieces sit in the low hundreds; hand-finished, numbered editions run higher. Price tracks material, edition size and finish far more than raw size.

Q3 Does 1/4 scale figure guide hold its value?

Numbered editions from a closed run hold value best. Open editions stay flat because supply is never capped.

Q4 Is a bigger piece always better?

No. Scale should match the shelf and the approach. One well-chosen anchor piece reads better than three pieces competing for the same space.

Q5 How do I compare two pieces fairly?

Line up material, scale, height including base, edition size and finish in one table. Price differences usually trace back to one of those five.

Q6 Do I need a display case?

It is the cheapest way to keep a collection looking new. If a case is impractical, dust fortnightly with a soft dry brush and keep the shelf out of direct sun.