PVC Figure Price: What It Costs

If you are comparing PVC figure price, the useful questions are narrower than most guides admit: what it is made of, how it is finished, how big it actually is, and how many exist.

Polystone and Mixed Media

Polystone is a casting resin loaded with mineral filler, which makes it denser and colder than plain resin and holds fine surface detail. The ASH 1/4-scale polystone bust is cold-cast polystone, hand-painted, on a machined alloy base. The LIN YUANZHE 1/4-scale articulated bust is mixed media, combining resin with fabric trim and ABS armour panels for a different tactile character in each zone of the piece.

Which Completes a Set

Because both are 1/4 scale from one studio, they sit together without scale conflict. Collectors who want the quieter piece start with ASH 1/4-scale polystone bust; those who want the conversation piece start with LIN. Owning both is the intended path, not a duplication, because the two finishes are deliberately different.

Hand-Painted Finish

The ASH 1/4-scale polystone bust is hand-painted, which is why edge transitions are crisp and sheen is consistent across panels. Hand work is the reason no two pieces share exactly the same micro-variation, and why any touch-up always reads as a patch rather than as original paint, so prevention beats repair.

ASH vs LIN YUANZHE

The ASH 1/4-scale polystone bust is a static 1/4-scale polystone bust, hand-painted, alloy base, edition of 500, about 32 cm, $459. The LIN YUANZHE 1/4-scale articulated bust is a 1/4-scale mixed-media articulated bust with red LED eyes on Type-C, edition of 999, about 34 cm, $499. Same studio, different collector job, and both are built to share a shelf.

Material Care at a Glance

Material	Care need	What to avoid
Polystone	Support the base, soft brush dusting	Solvents, lifting by the head
Fabric trim	40–55% humidity	Direct sun, compression in transit
ABS armour	Neutral pose in storage	Daily cycling of joints

The short version: material and edition size set the ceiling, finish sets the day-to-day impression, and display decides how much of that you actually see.

Frequently asked

Q1 What matters most when choosing PVC figure price?

Material, scale and edition size decide how a piece displays and how it holds value. Compare those three first, then look at finish and base.

Q2 How much should I expect to pay for PVC figure price?

Entry pieces sit in the low hundreds; hand-finished, numbered editions run higher. Price tracks material, edition size and finish far more than raw size.

Q3 Does PVC figure price hold its value?

Numbered editions from a closed run hold value best. Open editions stay flat because supply is never capped.

Q4 Is a bigger piece always better?

No. Scale should match the shelf and the approach. One well-chosen anchor piece reads better than three pieces competing for the same space.

Q5 How do I compare two pieces fairly?

Line up material, scale, height including base, edition size and finish in one table. Price differences usually trace back to one of those five.

Q6 Do I need a display case?

It is the cheapest way to keep a collection looking new. If a case is impractical, dust fortnightly with a soft dry brush and keep the shelf out of direct sun.